Identifikasi Bahaya Menggunakan Metode HIRARC Pada Pekerjaan Pemeliharaan Gardu dan Jaringan Distribusi PT PLN UP3 Cengkareng

Della Putri Adjani; Restu Hikmah Ayu Murti

doi:10.57213/antigen.v2i2.257

Authors

Della Putri Adjani Universitas Pembangunan Nasional “Veteran” Jawa Timur
Restu Hikmah Ayu Murti Universitas Pembangunan Nasional “Veteran” Jawa Timur

DOI:

https://doi.org/10.57213/antigen.v2i2.257

Keywords:

HIRARC, Occupational Safety, PT PLN.

Abstract

PT PLN is one of the largest companies providing electricity services in Indonesia. PT PLN is responsible for electricity generation, transmission, and distribution activities throughout Indonesia. This includes providing all electricity-related needs to the community. One of the activities is maintenance work on substations and distribution networks. As the largest electricity company in Indonesia, occupational safety is something that needs to be considered in all its activities. HIRARC is one of the methods used to prevent work accidents. HIRARC is a method used to identify dangers from an activity in a systematic and structured manner that can cause risks and explains how to control risks so that they do not cause losses. There were 6 sources of danger and 9 risks in concrete substation maintenance work and 8 sources of danger and 11 risks in low-voltage network maintenance work. Risk assessments for both concrete substation maintenance work and low-voltage network maintenance found 3 categories of danger, namely moderate, high, and extreme. After implementing risk control, it was found that all types of work were in the low category. This shows that the HIRARC method is quite effective in applying substation and distribution network maintenance work at PT PLN UP3 Cengkareng.

References

Ariyani, R., Suarantalla, R., & Mashabai, I. (2021). Analisa Potensi Kecelakaan Kerja pada PT. PLN (Persero) Sumbawa Menggunakan Metode Hazard and Operability Study (HAZOP). Jurnal Industri & Teknologi Samawa, (Vol 2, Issue 1). pp. 11—21.

AS/NZS 4360:2004 Australian/New Zealand Standard Risk Management.

Aulia, L., Rahmat Jermawanto, A. (2020) Analisis Risiko Keselamatan Kerja pada Bagian Pelayanan Distribusi Listrik dengan Metode HIRARC (Studi Kasus di PT Haleyora Power). Jurnal Ilmiah Nasional Bidang Ilmu Teknik, (Vol 8, Issue 1). pp. 20—24.

Badan Penyelenggara Jaminan Sosial Ketenagakerjaan 9 (BPJS). (2019). Angka Kasus Kecelakaan Kerja (Internet). BPJS Ketenagakerjaan. (Diakses pada 1 Mei 2024)

Badan Pusat Statistik (BPS). (2024). Jumlah Kecelakaan, Korban Mati, Luka Berat, Luka Ringan, dan Kerugian Materi 2022. (Diakses pada 1 Mei 2024)

Buntarto, dkk. (2015). Keselamatan dan Kesehatan Kerja. Yogyakarta: PT Pustaka Baru.

Darmawan, M., Adiarta, A., Gede Made Surya Bumi Pracisataram, I. (2023). Pengembangan Media Pembelakaran Keselamatan Ketenagalistrikan (K2) Berbasis QR Code untuk Menunjang Perkuliahan K3. Jurnal Pendidikan Teknik Eletro, (Vol 12, Issue 3). pp. 273—281.

Fandy, D., & Widiawan, K. (2022). Identifikasi Bahaya, Penilaian Risiko, dan Pengendalian Risiko Kecelakaan Kerja di PT AW Plus UPVC Bali. Jurnal Titra, (Vol 10, Issue 2). pp. 129—156.

Ghika Smarandana, Ade Momon, & Jauhari Arifin. (2021). Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC). Jurnal INTECH Teknik Industri Universitas Serang Raya, (Vol 7, Issue 1), pp. 56–62.

OHSAS 18001:2007. Occupational Health And Safety Management System – Requirements.

Riptifah Tri Handari, S., Samrotul Qolbi, M. (2021). Faktor-Faktor Kejadian Kecelakaan Kerja pada Pekerja Ketinggian di PT. X Tahun 2019. Jurnal Kedokteran dan Kesehatan, (Vol 17, Issue 1). pp. 90—98.

Ramadhan, F. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Metode Hazard Identification Risk Assesment and Risk Control (HIRARC). Seminar Nasional Riset Terapan 2017. pp. 164—169.

Septian Purnama, D. (2015). Analisia Penerapan Metode HIRARC (Hazard Identification Risk Assesment and Risk Control) dan HAZOPS (Hazard and Operability Study) dalam Kegiatan Identifikasi Potensi Bahaya dan Resiko pada Proses Unloading Unit di PT. Toyota Astra Motor. Jurnal Pasti, (Vol. 9, Issue 3). pp. 311—319.

Taher, C., & Widiawan, K. (2023). Identifikasi Bahaya, Penilaian Risiko, dan Pengendalian Risiko di Pabrik Roti PT X. Jurnal Titra, (Vol. 11, Issue 1). pp. 57—64.

Undang-Undang Republik Indonesia. (1970). Undang-Undang Republik Indonesia Nomor 1 Tahun 1970 tentang Keselamatan Kerja. Jakarta.